View FLM1011-6F_1135778.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FLM1011-6F
X, Ku-Band Internally Matched FET FEATURES
* * * * * * * High Output Power: P1dB = 37.5dBm (Typ.) High Gain: G1dB = 7.5dB (Typ.) High PAE: add = 28% (Typ.) Low IM3 = -45dBc@Po = 25dBm Broad Band: 10.7 ~ 11.7GHz Impedance Matched Zin/Zout = 50 Hermetically Sealed
DESCRIPTION
The FLM1011-6F is a power GaAs FET that is internally matched for standard communication bands to provide optimum power and gain in a 50 ohm system. Eudyna's stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING (Ambient Temperature Ta=25C)
Item Drain-Source Voltage Gate-Source Voltage Total Power Dissipation Storage Temperature Channel Temperature Symbol VDS VGS PT Tstg Tch Tc = 25C Condition Rating 15 -5 31.2 -65 to +175 175 Unit V V W C C
Fujitsu recommends the following conditions for the reliable operation of GaAs FETs: 1. The drain-source operating voltage (VDS) should not exceed 10 volts. 2. The forward and reverse gate currents should not exceed 26.0 and -2.8 mA respectively with gate resistance of 100.
ELECTRICAL CHARACTERISTICS (Ambient Temperature Ta=25C)
Item Saturated Drain Current Transconductance Pinch-off Voltage Gate Source Breakdown Voltage Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Drain Current Power-Added Efficiency Gain Flatness 3rd Order Intermodulation Distortion Thermal Resistance CASE STYLE: IA Symbol IDSS gm Vp VGSO P1dB G1dB Idsr add G IM3 Rth f = 11.7GHz, f = 10MHz 2-Tone Test Pout = 25dBm S.C.L. Channel to Case VDS = 10V, IDS = 0.6 IDSS(Typ.), f = 10.7 ~ 11.7 GHz, ZS = ZL = 50 Test Conditions VDS = 5V, VGS = 0V VDS = 5V, IDS = 1800mA VDS = 5V, IDS = 120mA IGS = -120A Min. -0.5 -5 36.5 6.5 -42 Limit Typ. Max. 2800 2350 -1.5 37.5 7.5 1800 28 -45 4.0 4200 -3.0 2100 0.6 4.5 Unit mA mS V V dBm dB mA % dB dBc C/W
G.C.P.: Gain Compression Point, S.C.L.: Single Carrier Level
Edition 1.4 August 2004
1
FLM1011-6F
X, Ku-Band Internally Matched FET
POWER DERATING CURVE OUTPUT POWER & IM3 vs. INPUT POWER
VDS=10V f1 = 11.7 GHz 32 f2 = 11.71 GHz 2-tone test 30
28 26 24 22
IM3
Total Power Dissipation (W)
40
Output Power (S.C.L.) (dBc)
Pout
30
-20 -30 -40 -50
20
10
0
50
100
150
200
15
17
19
21
23
25
Case Temperature (C)
Input Power (S.C.L.) (dBm) S.C.L.: Single Carrier Level
OUTPUT POWER vs. FREQUENCY
VDS=10V
P1dB
OUTPUT POWER vs. INPUT POWER
38
Output Power (dBm)
Pin=32dBm
VDS=10V f = 11.2 GHz
37
36 34 32 30 28 26 20 22 24 26 28 30 32
add Pout
Output Power (dBm)
35 33 31 29 27 10.8 11.0 11.2 11.4
P1dB 28dBm 26dBm 24dBm 22dBm 20dBm
40 30 20 10
11.6
Frequency (GHz)
Input Power (dBm)
2
add (%)
IM3 (dBc)
FLM1011-6F
X, Ku-Band Internally Matched FET
S11 S22 +j100 +j25
10.9 10.7 11.1 11.3 11.5 11.5 11.7 11.7 11.9 11.9 250 11.3 11.1 11.5 11.7
+j50
+90
S21 S12
+j250
10.7
11.1 10.9
+j10
10.5 GHz
10.9
10.9 10.7
11.1 11.3 50
11.9 11.3 11.5 11.7 11.9 1 2 3 4 5
10.7 10.5 GHz
0
10
10.5 GHz
180
10.5 GHz
0
SCALE FOR |S21| SCALE FOR |S12|
-j10
-j250
0.1
-j25 -j50
-j100
0.2
-90
FREQUENCY (MHZ)
10500 10600 10700 10800 10900 11000 11100 11200 11300 11400 11500 11600 11700 11800 11900
S11 MAG
.655 .639 .621 .601 .580 .555 .523 .488 .443 .397 .350 .311 .282 .259 .252
ANG
149.3 139.8 130.3 120.5 109.7 98.4 85.9 72.6 58.8 42.8 27.2 9.3 -9.1 -30.2 -51.0
S-PARAMETERS VDS = 10V, IDS = 1800mA S21 S12 MAG ANG MAG ANG
2.654 2.766 2.896 2.899 2.855 2.760 2.685 2.683 2.693 2.736 2.740 2.785 2.780 2.663 2.469 175.1 167.0 157.7 146.9 137.6 128.8 121.5 114.7 107.1 99.3 90.6 82.0 70.9 58.7 49.1 .037 .039 .049 .050 .060 .066 .078 .086 .091 .097 .099 .103 .103 .108 .107 160.5 151.3 135.2 127.2 113.5 104.6 93.9 83.3 74.1 62.7 53.0 41.7 35.4 25.6 18.6
S22 MAG
.230 .245 .264 .270 .293 .284 .290 .281 .282 .286 .302 .315 .348 .372 .396
ANG
168.6 151.6 136.9 123.0 111.3 96.4 83.8 67.2 49.6 29.7 11.4 -5.8 -22.4 -36.8 -48.2
3
FLM1011-6F
X, Ku-Band Internally Matched FET
Case Style "IA" Metal-Ceramic Hermetic Package
1.5 Min. (0.059) 1 2-R 1.250.15 (0.049) 0.1 (0.004) 4 2 3 0.5 (0.020) 1.5 Min. (0.059) 1.80.15 (0.071) 3.2 Max. (0.126) 8.1 (0.319) 0.2 Max. (0.008) 1.15 (0.045) 9.70.15 (0.382)
13.00.15 (0.512) 16.50.15 (0.650)
1. 2. 3. 4.
Gate Source (Flange) Drain Source (Flange)
Unit: mm(inches)
For further information please contact:
CAUTION
Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures:
Eudyna Devices USA Inc.
2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111
www.us.eudyna.com
* Do not put this product into the mouth. * Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. * Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures.
Eudyna Devices Europe Ltd.
Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888
Eudyna Devices Asia Pte Ltd. Hong Kong Branch
Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921
Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others.
(c) 2004 Eudyna Devices USA Inc. Printed in U.S.A.
Eudyna Devices Inc.
Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170
4

▲Up To Search▲

Price & Availability of FLM1011-6F

	To Download FLM1011-6F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .